Proper Use and Care Instructions
How do I assemble the mirror?
To assemble, you simply insert the stem of the mirror onto the base which also functions as a tray for small accessories and makeup tools.
How do I disassemble the mirror?
To detach the base, hold the stem of the mirror and wriggle it from side to side while pulling it up until the clip unlocks.
How do I adjust the brightness of the lights?
You simply do a long press on the touch sensor switch located on the face of the mirror to adjust the brightness from dim to bright or vice versa.
Can I adjust the angle of the mirror?
Yes, you can rotate the mirror 360 degrees horizontally and 180 degrees vertically.
What is the power source for the lights?
We have included a USB cord that you can plug into an adapter and into your power outlet or you can also use 4 new AA batteries from the same brand. Batteries are not included.
How do I install the batteries?
You will find the battery compartment at the back of the mirror. Gently slide the cover and insert 4 fresh, new batteries from the same brand. Make sure you follow the battery arrangement illustrated in the compartment. Slide back the cover once you’re done.
Is the USB cord used to charge the lights?
NO, it is not used for charging but rather to power up the lights. That is, the mirror does NOT have a built-in battery pack inside that you need to charge. You either plug the USB cord to an adapter and into a power outlet or you can also use 4 AA batteries.
Why are the lights not turning on?
Check if the USB cord is inserted correctly into the port and that the adapter is plugged in correctly to the power outlet. If you’re using batteries, always make sure that you are using 4 new AA batteries from the same brand. Batteries low on power will not work for the lights.
How do I clean the mirror?
You can use a soft cloth with a little water to clean the mirror.
What if I have a problem with my mirror not covered here?